1. Ford Expedition
  2. Owner info
  3. Owner’s manuals
  4. 2023
  5. Adjusting the Integrated Trailer Brake Controller Mode

2023 Ford Expedition Owner’s Manual — Adjusting the Integrated Trailer Brake Controller Mode

Integrated Trailer Brake Controller (If Equipped)

Select the correct integrated trailer brake controller mode option using the touchscreen.

Note:   Trailer brake gain settings are saved to the active trailer profile.

Selecting the Trailer Brake Type

  1. Press Default for trailers with electromagnetic drum brake systems or press Electric over Hydraulic for trailers with electrically actuated hydraulic brake systems.
  1. Press Save.

Selecting the Trailer Brake Effort

  1. Select a setting for your trailer.

Note:   The default value is Low and is the recommended setting for most trailers. Select a different setting if your trailer's brakes require more initial voltage, or you prefer more aggressive trailer braking.

  1. Press Save.

INTEGRATED TRAILER BRAKE CONTROLLER – INFORMATION MESSAGES



Message   Action  

Trailer Connected

The system detects a correct trailer connection during a given ignition cycle.  

Trailer Disconnected

The system detects the trailer wiring connection is disconnected, during a given ignition cycle.  

Trailer Wiring Fault

The system detects an electrical fault in the trailer brake circuit. If this message appears without a trailer attached, see your authorized dealer. If a trailer is attached, inspect and repair the trailer wiring.  

Trailer Brake Gain: {trailer gain value:#0.0}

Displays the current gain setting for the trailer brake.  

Trailer Brake Gain: {trailer gain value:#0.0} No Trailer

Displays the current gain setting for the trailer brake when you do not have a trailer connected.  

INTEGRATED TRAILER BRAKE CONTROLLER – FREQUENTLY ASKED QUESTIONS



How do I determine if there is an issue with the wiring on my vehicle?

  • A message displays accompanied by a single tone, when no trailer is connected. This indicates that the issue is between the trailer brake controller and the 7-pin connector at the bumper.

How do I determine if there is an issue with the wiring on my trailer?

  • A message only displays with a trailer connected. Consult your trailer dealer for assistance.

All 2023 sections

Stored owner’s manualImported HTML from the shared Autotk manuals tables. Not an official Toyota site.